Premio-computer Apollo/Shadowhawk User Manual Page 127

  • Download
  • Add to my manuals
  • Print
  • Page
    / 153
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 126
Intel Desktop Board D845HV/D845WN Technical Product Specification
104
4.4.3 Peripheral Configuration Submenu
To access this submenu, select Advanced on the menu bar and then Peripheral Configuration.
Maintenance Main
Advanced
Security Power Boot Exit
PCI Configuration
Boot Configuration
Peripheral Configuration
IDE Configuration
Diskette Configuration
Event Log Configuration
Video Configuration
The submenu represented in Table 66 is used for configuring computer peripherals.
Table 66. Peripheral Configuration Submenu
Feature Options Description
Serial Port A • Disabled
• Enabled
• Auto (default)
Configures serial port A.
Auto assigns the first free COM port, normally COM1, the
address 3F8h, and the interrupt IRQ4.
An * (asterisk) displayed next to an address indicates a
conflict with another device.
Base I/O address
(This feature is present
only when Serial Port A
is set to Enabled)
• 3F8 (default)
• 2F8
• 3E8
• 2E8
Specifies the base I/O address for serial port A, if serial port A
is Enabled.
Interrupt
(This feature is present
only when Serial Port A
is set to Enabled)
• IRQ 3
• IRQ 4
(default)
Specifies the interrupt for serial port A, if serial port A is
Enabled.
Serial Port B • Disabled
• Enabled
• Auto (default)
Configures serial port B.
Auto assigns the first free COM port, normally COM 2, the
address 3F8h, and the interrupt IRQ4.
An * (asterisk) displayed next to an address indicates a
conflict with another device.
Mode
• Normal
(default)
• IrDA SIR-A
• ASK_IR
Configures the second UART in the I/O controller to function
as either a COM port wired to the serial port B connector
(Normal option) or as an infrared port wired to the front panel
connector (IrDA SIR-A or ASK_IR option).
Base I/O address
(This feature is displayed
only if Serial Port B is set
to Enabled.)
• 2F8 (default)
• 3E8
• 2E8
Specifies the base I/O address for serial port B, if serial port B
is set to Enabled.
continued
Page view 126
1 2 ... 122 123 124 125 126 127 128 129 130 131 132 ... 152 153

Comments to this Manuals

No comments

Campbell OBS-3A manuales

Manuales del propietario y guías del usuario para De medición, control y control Campbell OBS-3A.
Ofrecemos 2 manuales en pdf Campbell OBS-3A para descargar gratis por tipos de documentos: Especificaciones, Manual






Más productos y manuales para De medición, control y control Campbell

Modelos Tipo de documento
cs215 Manual de instrucciones   Campbell cs215 Instruction manual, 44 paginas
CR200 Manual del operador   Campbell CR200 Operator`s manual [en] , 210 paginas
CMP3-L Especificaciones   Campbell CMP3-L Specifications, 18 paginas
CS300 Manual de usuario   CS300 Apogee Silicon Pyranometer Brochure, 2 paginas
CR10XTCR Manual de usuario   System Description, 2 paginas
HC2S3 Manual de usuario   Campbell HC2S3 User manual, 42 paginas
HC2S3 Manual   Campbell HC2S3 Product manual, 42 paginas
CR850 Especificaciones   Campbell CR850 Specifications, 50 paginas
HydroSense II Manual de instrucciones   Campbell HydroSense II Instruction manual [en] , 46 paginas
SP-LITE Manual de usuario   SP LITE Manual - Campbell Scientific, 23 paginas
HydroSense II Guía de usuario   Campbell HydroSense II User guide, 37 paginas
CR7 Manual de usuario   CR7 Measurement and Control System Brochure, 7 paginas
HydroSense II Guía de usuario   Campbell HydroSense II User guide [en] , 82 paginas
TGA200 Manual de usuario   Laser-based Isotope Ratio Analyzers, 7 paginas
229 Manual de usuario   229, CE4, and CE8 - Campbell Scientific, 2 paginas
CS650 Manual de instrucciones   Campbell CS650 Instruction manual [en] , 58 paginas
CNR4 Manual de instrucciones   Campbell CNR4 Instruction manual, 70 paginas
AVW1 Manual de usuario   Interfaces hilo vibrante AVW1 y AVW4, 2 paginas
CS525 Especificaciones   Campbell CS525 Specifications [en] , 18 paginas